Cabinet Hardware Placement

For a more current modern feel place the knobs so the bottom of the knob in upper cabinetry and the top of the knob in base cabinetry is flush with the edge of the frame.

Cabinet hardware placement. Upper cabinet knobs are placed on the bottom right hand corner of the face frame and for base cabinets knobs are located on the top left hand corner. This contemporary knob placement is both aesthetically pleasing and easy for installers. On upper cabinets the bottom screw hole should be placed 2 5 3 above the bottom of the door.

Although cabinet hardware adds details and the overall design of a room it should also be functional. Unlike drawer cabinetry hardware placement for door cabinetry is much more subjective. When working with shaker style cabinets place knobs 2 1 2 inches away from the edge of the frame view example below.

Cabinet pulls have two screws as opposed to only one screw with a knob. The knob or pull can align with the rail or it could be higher or lower there are no rules. A classic approach to take is to center the middle of the knob to the edge of the face frame.

Hardware placement on cabinet doors once you have decided on if you will use pulls or knobs or a mix of both it s time to decide where exactly to install them on doors and drawers. The same goes with pulls on cabinet doors. On lower cabinets the top screw hole should be placed 2 5 3 below the top of the door.

Cabinet door hardware placement guidelines taylorcraft cabinet door company for knobs we recommend the knob holes be centered horizontally on the door stile and on upper cabinets place knob holes 2 1 2 up from the bottom of the door. This placement is also the most practical putting the handles as much within reach as possible. Let s look at a few options.

The hardware spacing for the wall cabinets should match the base cabinets. Well except for this rule. Most cabinet knobs today are installed by lining up the installation hole with the edge of the rail.