How To Install Cabinets

Order the cabinets and assemble key tools and materials special combination drill bit this special bit saves time because it bores a pilot hole for the screw and a countersink hole for the screw head.

How to install cabinets. Get detailed instructions on installing wall cabinets in any room here. Use a wood t brace to prop up the cabinet and screw the cabinet into the wall loosely. Mark stud locations onto back of cabinet.

Get brochures from the cabinet company. Step 1 make the beginning preparations for your installation project step 2 carefully measure and plan your space. Hanging upper kitchen cabinets is the next step in this series.

Locate wall studs using hammer and finishing nail. Place the corner wall cabinet on the screws or ledger. If you are replacing existing cabinets you may want to use them as a pattern.

It will tell you what standard sizes are available this usually means 12 wide at a minimum with larger cabinets at 3 increments. Use a level to be sure that the cabinet is straight. Hang the wall cabinets attach as many cabinets together as you can safely lift and install on the ledger board usually two.

Measure from the corner to your first stud on the wall and then mark the cabinet as well. Another step in how to install cabinets is to find the largest distance between the outside of the cabinet and the wall. Drill and countersink two holes in each of the mounting rails inside the cabinet and drive 2 1 2 inch cabinet screws through the holes.

Take that measurement and make a pencil mark on your filler strip measure over right to left in this case. Drill four holes through back of cabinet which correspond to the stud locations. Remove cabinet doors and set aside.