How To Paint A Metal File Cabinet

5 move the cabinet outside or into a room with plenty of ventilation and set it on top of.

How to paint a metal file cabinet. Next remove old rust from the metal file cabinet by using sandpaper and applying rust primer before painting. Lay down your cardboard or other protective covering on the garage floor driveway or other flat surface in a well ventilated area. If you have two filing cabinets paint them white and add a wide plank between the two to create a makeshift desk.

Sand your metal cabinets with a 220 or higher grit. Priming the cabinet will create a surface the paint can stick to and should prevent future rust. Scuff sand the entire cabinet including the drawers with 220 grit sandpaper to etch the existing paint.

Apply your metal primer and allow it to dry completely. Allow the cabinet time to dry. The best way to paint a metal file cabinet is to remove the drawers before anything else.

Nowadays filing cabinets are found in both homes and offices. Prep the filing cabinet run a piece of 220 or 320 grit sandpaper over the filing cabinet to make sure the surface is ready to accept the new paint. Prepare the metal cabinet for painting.

Love how softened up this utilitarian look is. This will ensure your piece is free from contaminates and provide a good surface to paint. Transfer the file cabinet base and drawers to the work surface.

Remove anything that may be in the drawers of the cabinet. This garage storage idea is one of our favorites. Then pour a small amount into a paint tray load up the foam roller and begin to paint the outside frame of the filing cabinet.