Installing Cabinets

Step 1 make the beginning preparations for your installation project step 2 carefully measure and plan your space.

Installing cabinets. If you are replacing existing cabinets you may want to use them as a pattern. Measure from the highest point in the floor and draw a level line marking the top of the base cabinets. Get brochures from the cabinet company.

You may also prefer to create a new layout to better suit your purposes. Here is a link to those red clamps https amzn to 2lbxiom here is a link to the red pole https amzn to 2shq49m. From that line and draw another line for the bottom of the upper cabinets.

Set cabinet on cabinet jack hold cabinet level then fasten to wall studs with 2 inch drywall screws and finishing washers. Locate wall studs using hammer and finishing nail. Mark stud locations onto back of cabinet.

Drill four holes through back of cabinet which correspond to the stud locations. It will tell you what standard sizes are available this usually means 12 wide at a minimum with larger cabinets at 3 increments. Mark cabinet layout lines onto the wall.

A good cabinet installation starts with a good layout.